Rear mounted radiators not only move the weight to the rear of the car to help with weight balance but also aid in better cooling as there is more coolant in the system and your radiator is now out of a hot engine bay. This leaves your engine bay open to better mount turbos or inset your intercooler. This means a larger crash zone for drifting. Keeping your important bits out of harms way.

designed around the needs of professional driftcars, this radiator is sized to not only fit in just about any vehicle but also to cool up to 1000hp. This is possible by using the best cores from BeCool radiators, twin 13” Spal Fans, and a fully enclosed shroud.

PLEASE HAVE A PROFESSIONAL INSTALL THIS RADIATOR. THIS IS NOT A BOLT IN SOLUTION. IT WILL REQUIRE SOME THOUGHT ON MOUNTING. EITHER CLAMPED TOP AND BOTTOM OR SIDE MOUTNING SOLUTIONS THAT REQUIRE TIG WELDING

• 16.5” tall, 31” wide at base, 31 3/8” wide at top, 6 3/8” thick with fans, 3” thick without fans

• Twin 13” Spal Fans 1777CFH a piece

• Dual Pass

• -20 ORB inlet and outlet ports (PASSENGER SIDE RH)

• 1/2 NPT top port for fill and bleed

• Bottom Petcock for draining

  **PLEASE ALLOW 3 WEEKS FOR FABRICATION AND SHIPPING OF PRODUCT